1～4 item / All 4 items
![Clamp Tester "CL255" [Rental]](https://image.www.ipros.com/public/product/image/1fa/2000463420/IPROS44322770777185518912.jpeg?w=280&h=280)
You can measure simply by clamping the wiring while it is powered on, without turning off the power or disconnecting the wiring.
【Features】 ■ Large diameter type (φ55mm) based on AC and DC current measurement ■ Model with CL250 as the effective value detection
![Leak Clamp Tester "CL345" [Rental]](https://image.www.ipros.com/public/default/object/noimage_l.gif?w=280&h=280)
This is a clamp tester for measuring leakage current.
**Features** - Medium diameter (φ40mm) type capable of measuring leakage current - Manual range switching - Auto power-off function This feature prevents battery depletion due to forgetting to turn off the power, extending battery life. It automatically enters the auto power-off state approximately 10 minutes after the switch operation. - Data hold function This function fixes the measured value on the LCD display. Pressing the "DATA HOLD" switch once activates the hold state, and the data at that moment is retained. The display does not change even if the input varies.
![Clamp Tester "CL250" [Rental]](https://image.www.ipros.com/public/product/image/e01/2000462921/IPROS07419146206822926915.jpeg?w=280&h=280)
You can measure simply by clamping the wiring while it is powered on, without turning off the power or disconnecting the wiring.
【Features】 ■ Large diameter type (φ55mm) based on AC and DC current measurement ■ AC/DC voltage measurement function, resistance measurement (continuity check) function ■ Equipped with output function
![Leak Clamp Tester "CL360" [Rental]](https://image.www.ipros.com/public/product/image/8f1/2000463430/IPROS46573919643874693794.jpeg?w=280&h=280)
Clamp tester for measuring leakage current.
【Features】 ■ Peak hold function Response time can be switched between approximately 10ms and 100ms. Hold characteristics = Change in indicated value over time is within approximately ±1% F.S after 1 minute of holding (at 23℃±10℃/75% RH or lower, provided there is no condensation). ■ Average value detection method ■ Data hold function with output capability
